Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Chainrings

$881.00
- AXS enabled for easy monitoring and firmware upgrades
- Fully integrated power meter into a direct mount chainring
- Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride
- Power balance measures left and right legs separately
- SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control
- Laser-etched chainring finish is more durable
- 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks.
- Speeds: 12
- Chainring material: Aluminum
- Power Meter Type: ANT USB

$76.95
Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. There are 3 offsets: - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks - Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 - Boost: 52mm chainline, 3mm offset - BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset - If you have a BB30 crankset (30mm diameter Aluminum Spindle) this measurement will determine whether it is a long or short spindle:

$79.95 - $89.95
The perfect 1x solution for your gravel, CX or road bike. Made from 7075 Aluminum, Wolf Tooth's patented Drop-Stop design helps clear mud while retaining your chain.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Not compatible with Shimano Asymmetric 110 BCD cranks or Campagnolo CX10/11 cranks
- Use of a clutch-style rear derailleur is recommended
- Made from 7075-T6 aluminum for long life

$24.00 - $63.00
Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains.
- 7000 series aluminum provides strength and durability
- 130mm BCD

$107.00
The radical look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. They subjected every size of chainring to untold environmental and mechanical tortures, abuse and neglect, in both lab and real-world settings, to come up with a chainring that would augment the Eagle drivetrain’s performance in all conditions. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear.

$19.00 - $38.00
Shifting performance has helped Full Speed Ahead to become a world leader for high-end chainrings. No one studies the design and manufacturing of each system, and each tooth, as carefully as we do. Our dedication shows in every revolution of the crank, and every perfect shift achieved. To meet or exceed the needs of any drivetrain, Full Speed Ahead has developed sophisticated design, testing and manufacturing protocols. This allows Full Speed Ahead to match your needs as perfectly as our chainrings match a chain. We offer more options, levels, and finishes than our competitors. We use the best materials available, imported from the USA, Europe, or sourced from our qualified vendors in Asia, to guarantee the durability, performance, and appearance will out-perform, and outlast the competition. Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations.
- Stamped AL7075/T6
- Chainrings are compatible with all 10-speed drivetrains, and compatible with FSA, SRAM, and Shimano 11-speed drivetrains
- Drivetrain Speeds: 11, 10

$77.99 - $99.99
- 7075-T6 aluminum ring for Easton Cinch system Road/CX/Gravel cranks
- Asymmetric four arm shape for greater stiffness in the power zones of the pedal stroke
- Narrow-wide tooth profiling prevents chaindrop with a guide or clutch derailleur
- Compatible with 9/10/11 speed chains, mounts using a common Park BBT-22 tool
- 47mm chainline with the Easton 129mm spindle
- 38T (80g), 40T (91g), 42T (98g), 44T (105g), 46T (112g), 48T (123g), 50T (137g)

$107.00
Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear.
- X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise.
- Designed to be used with Eagle chain
- Boost 3mm offset

$54.95
This chainring's tooth profile was developed specifically for Shimano's XTR, XT, and SLX 12-speed Hyperglide+ chain.
- Compatible only with Hyperglide+ 12-speed chain
- For use with Wolf Tooth CAMO spiders (not compatible with any other chainring mountings)
- Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention
- Prevents premature ring and chain wear that can come from non-optimized profiles

$119.00 - $128.00
Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain.
- Designed to be used with Eagle chains
- Material: Aluminum

$69.95
The Wolf Tooth 76 BCD chainrings fit any SRAM 76 BCD spider or Specialized Stout crankset.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life

$84.95 - $85.00
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings.
- Elliptical rings provide smoother, more efficient pedal rotation, which means better traction
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Not compatible with the SRAM RED and Force AXS 8-bolt interface
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended
- Compatible with 12-speed SRAM Flattop chain

$99.99
absoluteBLACK Oval 110 BCD 1x Chainrings for gravel greatly improve traction for gravel or road 1x setups. They are designed for all Shimano 4-bolt cranks such as Dura-Ace 9100, 9000, Ultegra 8000, 6800, and more. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.5-11.4%, with timing of 112-113° after TDC (top dead center).
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Provides excellent weight-to-strength ratio
- 12-Speed Eagle compatible
- Chainring has 1.5mm offset toward frame to provide the perfect chainline
- Chainring bolts are included

$69.99 - $74.99
Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders.
- Compatible with 9, 10, 11, and 12 speed
- Narrow Wide tooth profiling ensures consistent chain retention
- Lockring installed/removed with ISIS BB tool
- Stiff 4mm plate thickness to transfer loads without flexing

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

$25.00 - $50.00
FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain.
- Precision CNC machined AL7075/T6 alloy

$35.99
For SHIMANO STEPS E-BIKE drive systems, the SM-CRE61 chainring features a modern design for 9/10/11-speed drive units.
- Gear combination: 38T, 44T

$76.95 - $84.95
Direct mount rings designed for SRAM cranks with removable spiders. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention.
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Not compatible with the SRAM RED and Force AXS 8-bolt interface
- Made from 7075-T6 aluminum for long life
- Use of a clutch-style rear derailleur is recommended

$89.00 - $96.00
SRAM's X-Sync 11-speed chainring features tall teeth with an alternating tooth profile to hold the chain amazingly well and still provide space for mud to clear.
- Drivetrain Speeds: 10, 11
- Material: Aluminum
- Ring Position/Type: Chain Retaining Single Ring

$128.00
Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear.
- X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise.
- Designed to be used with Eagle chain
- Boost 3mm offset

$76.95
Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30.
Compatibility:
- These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM chainring.
There are 3 offsets: 0mm, 3mm, and 6mm
- 49mm chainline, 0mm offset for BB30 short-spindle cranks
- 52mm chainline, 3mm offset BB30
- 47mm chainline, 6mm offset for cyclocross and road cranks
- 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost
Notes for use with Fat Bikes:
- If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring.
- If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset

$24.00 - $84.00
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.
- 104mm BCD
- Material: Aluminum

$28.00
- Precision CNC-machined AL7075/T6
- Shifting ramps and stainless steel pins on outer rings
- Laser-etched logo
- Crankset Compatibility: Gossamer ABS 2019

$69.99
The all new Turbine 11 Speed rings are ready to ride. Completely redesigned from the ground up, these rings shift like nothing else. The Turbine rings are machined from 7075 aluminum, so they are built to last.
Rings are CNC'd from 7075 alloy, creating a ring with instantaneous smooth and quiet shifting, even under load. These 2x rings are super stiff at a minimal weight, resulting in a ring that demonstrates sharp and quick shifts while being highly resistant to impacts.

$44.99 - $69.99
RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH, and everything in-between.
- 7075-T6 aluminum, aerospace grade strength
- Compatible with 9, 10, 11 and 12 speed
- Stiff 4mm plate thickness and I-beam construction transfer loads without flexing
- Reversible laser etched graphics
- Non-threaded bolt holes

$128.00
Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. Oval ring shape for riders that want to adjust the power profile of their pedal stroke.
- The only oval rings with X-Sync 2 tooth design
- Direct Mount Type: Direct Mount SRAM
- Drivetrain Speeds: 10, 11, 12
- Material: Aluminum
- Ring Position/Type: Chain Retaining Single Ring
- Round or Oval: Oval
- Chainline/Hub Compatibility: 141/148 Boost Hubs

$64.95
Designed to fit 94 BCD 4-Bolt cranks such as the SRAM X1 crank, these rings will provide maximal chain retention and minimal noise. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life
- 49mm chainline
- Use of a clutch-style rear derailleur is recommended

$86.99
absoluteBLACK Premium Sub-Compact 110 BCD Oval Chainrings are designed to improve your climbing and cadence. They are compatible with all Shimano 110 BCD 4-bolt cranks. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability.
- Sub-Compact chainrings only work in predefined size combinations: 46/30 or 48/32
- Mounting bolts are included with the small ring
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing
- Use Shimano Dura-Ace 11-speed chain or SRAM Eagle 12-speed chain for proper clearance of mounting tabs
- Not compatible with SRAM Yaw front derailleurs
- 10, 11, and 12-speed compatible
- 9% ovality is ideal for climbing

$74.99
absoluteBLACK Oval 104 BCD Chainrings for Hyperglide+ greatly improve traction and climbing abilities. They are designed for any cranks that use a 104 BCD mounting interface. These chainrings will only work with Shimano CN-M9100, 8100, and 7100 Hyperglide+ chains due to the different thickness and shape of the teeth. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center).
- This chainring will only work with Shimano CN-M9100, 8100, and 7100 Hyperglide+ chains due to the different thickness of the teeth
- Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding
- Provides excellent weight-to-strength ratio
Page 1 of 8
Next page