Cycling Accessories

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you’ll forget you’re wearing it. Leveraging data science, we refined every detail of the S-Works Torch’s upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL biomechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. *** IMPORTANT FOR WIDE FIT*** the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

Ultimate road competition shoe with supremely engineered fit and optimum power transfer. FEATURES - 360° surround wrapping upper creates a supremely engineered fit for all riders. - Heel cup with anti-twist stabilization secures optimal foot positioning for intense acceleration and high tempo cadences. - Function-specific zones and scientifically optimized upper materials maximize fit and pedaling performance. - Dual low-profile BOA Li2 dials allow quick and precise micro-adjustments. - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Adjustable powerzone lace guide securely holds forefoot.

Experience ultimate power transmission with the XC9 S-Phyre mountain shoes. Synthetic Leather - Lighter, stronger and more durable than natural leathers Reinforced Spike Mount - Reinforced spike mount for extreme conditions External Heel Cup - External curved heel cup suppresses foot twist and roll Carbon Sole/Mid Sole - Carbon fiber composite sole/mid sole Carbon Plate - Inserted in ball-grid section Harder Contact Block - Promotes stability and pedaling efficiency - Dedicated X-Country and Cyclocross no-compromise racing shoes - Low stack height sole helps stabilize foot during the downward pedaling stroke - A one-piece surround upper, narrow bottom, rounded heel, and slim toe box provide a glove-like fit - Dual independent Boa IP1 dials allow quick and precise micro-adjustment - Adjustable powerzone wire guide holds forefoot securely - Proprietary MICHELIN outsole minimizes weight and offers increased traction

What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7, you get a shoe with no compromises. We took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to their lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that Specialized kept in line with the motto "every watt is sacred." In the comfort arena, Specialized kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. They also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy BOA dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything Specialized knows about footwear, compacted into one shoe–no compromises, no shortcuts, just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Specialized's stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)

Finding the perfect cross country race shoes can be tough going, but with the S-Works Recon shoes, we've made the choice simple. Exceptional power transfer? Check. Gram-counter approved? Check. Undeniable style? You got it. With the S-Works Recon you get XC-focused mountain bike shoes that truly have no compromises. We took a no-holds-barred approach to transferring every bit of your power to the pedals. The sole utilizes a rubber toe and heel for superior off-the-bike traction, while the pontoons are made of a harder TPU to provide excellent stability and power transfer to the pedal. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With all of these features combined, you can be sure that we've kept in line with the motto "every watt is sacred." In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works Recon to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy Boa dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial-in your fit. The S-Works Recon embodies everything we know about footwear, compacted into one shoe with no compromises, no shortcuts—just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 270g (1/2 pair, Size 42)

Technical Details: - Racer Fit for snug upper - Bounded upper all seamless for comfort to prevent pressure points - Integrated double X-Comfort Zone for a large range of feet width - BOA Li2, a new mechanism that generates higher power with finer resolution - PowerZone Technology for better ankle support and stability - Lace system with 4 independent adjustment zone to maximized comfort during long rides - 100% Carbon sole with Patented Air Chanel for constant airflow to prevent fatigue and numbness - 3D insoles with 3 adjustable arches for a custom fit - 7.9oz / 225g (size 42)

Microtech Microfiber incorporates features of resistance, stability, lightness, transpirability, water-repellency and eco-friendliness. It is manufactured using the "Water-Tech” water treatment: - Lower environmental impact - Less noxious emissions into the air and into the work environment - Water-based products, not solvents, were used, which is beneficial to the environment as well as the final user. The Soft Instep 4 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable. Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable. - Reinforced heel cup. - The MTB RS17 SOLE consists of a Nylon and PU blend. This sole is lighter than the traditional competition sole and has been updated with a more aggressive tread pattern and a replaceable toe tread insert. - Regular "D" width last for precise fit.

Upper: Microfibre microtech Sole: Carbon composite 20 sole Technology: - Soft instep 4 - Tecno 3 system - Sidi heel cup - Replaceable heel pad

The shoe that offers the best for everyone. Whether racing or a casual ride, the Sidi Genius 10 is simply the best platform for a great day in the saddle. Built on over 60 years of experience in manufacturing cycling shoes, Genius is designed on a carbon composite sole that offers the perfect combination of strength and comfort, while the Microtech upper adapts to the shape of the foot for superior comfort. -The Soft Instep Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area -The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep -Sidi's Tecno-3 System closure dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -Improved proprietary Sidi wire material is non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 system is serviceable and replaceable -The newly designed integrated heel cup is lightweight and reinforced to avoid deformations during prolonged strenuous use -The Carbon Composite Sole 20 is composed of nylon and injected carbon fiber. The result is a light and rigid sole that is impervious to humidity -The central part of the sole is graduated with a millimetric scale to facilitate accurate and repeatable cleat set-up -For walkability, Sidi cycling shoes include a user replaceable polyurethane heel pad

TLD's Stage helmet: less weight, more fun! Since its debut, the Stage helmet has redefined mountain bike safety, style, comfort and ventilation. Stage is the lightest full-face helmet in its class, and combines MIPS (Multi-directional Impact Protection System), EPP (for slow speed impacts) and EPS (for high-speed impacts) in one sleek package, that sets the standard for mountain bike enduro helmets. A Polylite shell w/fiber reinforcement and Polyacrilite injected chin bar w/EXOskeleton adds strength without sacrificing weight. 11 high-flow air intakes and 14 exhaust ports and large ventilation chin bar openings aid in cooling and comfort in all conditions. The TLD Stage Helmet also includes an X-Static® helmet liner that is moisture-wicking, quick-drying and odor-fighting. A Fidlock® buckle and lightweight hardware round out the overall package. - DUAL DENSITY EPS co-molded with EPP combine to safely manage high and low-speed impact energy (PATENT PENDING) - MIPS brain protection system reduces rotational forces to the brain in certain crash scenarios - EPP lined chinbar for multi impact performance - Drawstring bag with breathable mesh paneling and additional anodized hardware, liners and pads - Meets Certification for CPSC 1203, CE EN1078, ASTM F1952, ASTM F2032, and AS/NZS 2063 - 690 grams (1.5 lbs) size M/L - 3 Year Warranty **Not rated for motorized use**

The elements are in perfect equilibrium: performance, aerodynamics and safety. The design leaves you in no doubt: Protone Icon is KASK's new classic, an exceptional helmet for road, gravel, cyclocross and MTB cross-country. Every aspect has been redesigned to push performance to the limits. REDEFINED GREATNESS A redesigned internal frame gives the wearer greater safety. Seamless technology joins the lower and upper parts of the shell to give it a refined, elegant look and improved aerodynamics. The new OCTOFIT+ adjustment system optimizes the helmet's comfort and stability, while a vertical stabilizer across the nape of the neck provides ergonomic neck support and delivers enhanced balance and a customized fit. Its large rotation cap coated in a special rubber increases finger grip, and a reflective insert in the rear helps keep the helmet's wearer even safer. The internal lining is made of CoolMax® fabric which, as well as being comfortable and quick-drying, is also removable and washable. As is standard with all KASK helmets, the Protone Icon has been developed in accordance with the KASK ROTATIONAL IMPACT WG11 TEST protocol, an objective, scientific approach to measuring the helmet's performance against rotational impacts.

The most aero road helmet in the peloton now breathes better. The S-Works Evade 3 was reinvented from the inside out to cool better, making it the fastest choice for more stages. Through extensive Computational Fluid Dynamics and Win Tunnel testing, we created a rear "diffuser" that helps minimize drag and improve ventilation. The diffuser helps optimize aero performance by allowing air to release easier and improves ventilation by drawing 10% more air through the helmet at a given speed. The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ANGi-ready, ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit. Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized's proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings. - Enlarged front vents help increase ventilation. - Rear Diffuser for aero and ventilation benefits. - MIPS Air Node is MIPS' most ventilation-focused solution. - Adjustable Tri-Fix web splitter boosts comfort through personalized fit. - Precision, full-wrap polycarbonate shell for increased durability and premium finish. - Dual-density optimized EPS foam.

The S-Works Prevail 3 helmet is perfect for riders who value the comfort and thermoregulation benefits that superior ventilation delivers. It is the ultimate all-around helmet that excels in hot conditions, strenuous climbs, and mountainous stages. With a never-ending quest to push the limits of ventilation, we eliminated air-blocking foam "bridges" from the center, effectively creating thru-air channels that increase the surface area of ventilation by 24.5% compared to the S-Works Prevail II Vent helmet. The all-new S-Works Prevail 3 has the most ventilation area of any helmet we have ever made. When a helmet is impacted, its job is to dissipate the energy of the impact. The conventional approach to helmet design is that more foam (EPS) means better energy management. We re-wrote the book on cycling helmet design by innovating beyond foam. Woven aramid "cables" traverse the helmet and are anchored to carbon fiber side panels. Upon impact, the AirCage technology* works as a suspension bridge and is designed to distribute localized forces throughout the helmet. The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ANGi-ready, ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit. Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized's proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings. - AirCage innovation increases airflow. - Precision, full-wrap polycarbonate shell for increased durability and premium finish. - MIPS Air Node technology is MIPS' most ventilation-focused solution. - Adjustable Tri-Fix web splitter boosts comfort through personalized fit. - Occipital Base Adjustment optimizes comfort and compatibility with glasses. - ANGi-ready Mindset fit system for improved grip and reaction for easy on-the-go fit.

The Ventral Lite is for when grams count. Weighing less than 200g, every aspect of this helmet has been developed to provide protection at the lowest weight possible. Taking the Ventral Air as our starting point, we updated and enhanced the structure of the helmet shell to provide more rigidity and save weight on the EPS liner. A lighter PC shell covering less of the liner further helps to keep the total weight as low as possible. A minimalist approach to every aspect of the helmet ensures weight is kept to an absolute minimum. Every aspect of the helmet, the adjustment system, the straps, are all as light as possible while still meeting vital safety standards. - Exceptionally lightweight—our lightest helmet so far - Highly ventilated - Enhanced structural integrity

The most versatile helmet you can buy! The Enduro 3.0 helmet offers three different levels of protection. Wear the half shell for those light trail days or attached the over-ear coverage for slightly more aggressive trails. For total protection clip in the chin bar for full-face protection when you need it! Made from a lightweight polymer shell, the Enduro 3.0 helmet features a Powerbridge construction for greater shell strength. The Enduro 3.0 helmet also features 360 ° Turbine Technology. These small blue 360-moving discs are constructed from an energy-absorbing shape and material. This tech has two exclusive advantages, namely the reduction of rotational acceleration to the head and brain and the absorption of energy upon impact at the concussion level. The micro adjuster at the back ensures the perfect fit. There is also a sunglasses docking port to stash your sunnies when you don’t need them. The visor is adjustable and has a breakaway function for extra rotational impact force reduction. Choose your style and be ready for any trail with the 3-in-1 enduro helmet. Details: - Lightweight polymer shell in three sizes - Powerbridge top shell construction for greater load distribution - 3-IN-1 helmet design: 1) Half-shell open-face helmet 2) Removable chin bar with easy push-button system 3) Removable over-the-ear guards with an easy push-button system - Sunglasses dock port for easy, secure storage. - Fidlock magnetic closure system - 360° Turbine Technology - Reduced peak brain acceleration by up to 30% at impact speeds associated with - concussion - Reduces peak brain rotational acceleration by up to 40% - Adjustable visor with breakaway function for rotational impact force reduction - In-molded impact foam for superior energy absorption - Maximized ventilation with 20 vents effective even at low speeds - Moisture-wicking, breathable, anti-odor, and washable inner liner - Weight: From 700g (1.54 lbs). Without chin bar: from 360g (0.79 lbs) - Certified and tested: AS/NZS 2063:2008, EN1078, CPSC 1203, ASTM F1952–10

The Kortal Race MIPS helmet provides extended protection zones, exceptional ventilation, and integrated technology to protect before, during, and after an accident, making it ideal for enduro. It features a new MIPS rotational impact protection system, as well as a RECCO Reflector and an integrated NFC Medical ID chip that stores a rider's vital info and can be accessed at the scene of an accident. The adjustable and detachable helmet peak raises high on the helmet so goggles can be stored. Rear ventilation can also be used to securely store sunglasses. No ventilation gets covered by a goggle strap, helping riders stay cool. The helmet is certified to the Dutch NTA 8776 electric bicycle helmet standard, the only such standard in the world. - Trail/Enduro helmet - Features new Mips rotational impact protection solution - RECCO Reflector - NFC Medical ID chip - Electric bicycle certified - Dutch NTA 8776 - Adjustable peak can be lifted high enough that goggles/sunglasses can be stored underneath the peak - Design ensures goggle strap does not cover ventilation - Patented breakaway peak enhances neck protection

The new S-Works Prevail II Vent is the next evolution in our Cooler Heads Prevail approach to helmet design. By taking our S-Works Prevail II and increasing the total vent surface area by 20%, we've developed a whole new category of ventilated helmets. This increase in vent surface area has allowed us to more than double the cooling capacity of the new Prevail II Vent compared to the original Prevail II. So, even on the hottest climbs in the most humid conditions, you can grind away, assured that the S-Works Prevail II Vent is keeping you cool and performing your best. - Our ANGi Crash Sensor gives you and your loved one' peace-of-mind like never before. When combined with our iOS or Android app, the sensor will detect a crash and send a text message to specified contacts in your phone. It also syncs with our app and STRAVA to provide GPS-based activity tracking. Your new helmet even includes a lifetime subscription to the Specialized Ride app. - Our ultralight and supremely comfortable version of MIPS (MIPS SL) has only gotten better. We've added perforations, along with a ripstop mesh to maximize breathability and performance. With MIPS SL, we've essentially integrated MIPS technology within the helmet padding itself. MIPS SL's minimalist watchband attachment system provides 10 to 15 millimeters of rotation in every direction and offers the same brain protection benefits as other versions of MIPS, while also ushering in a new level of comfort and weight savings. - Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. - The new 5th Dimension Cooling System, with its redesigned, patented, carbon fiber and aramid-reinforced skeleton, provides internal EPS support, allowing for large vents with deep internal channels and aligned exhaust ports, all adding up to double the cooling capacity and a 20% increase in total vent size. These same features that bring you unprecedented cooling also amount to six seconds saved over 40km in the Win Tunnel when compared to a standard road helmet. Additionally, the new updated, perforated MIPs SL pad kit keeps moisture moving and allows for even more breathability. - Thin, soft, and lightweight 4X DryLite webbing won't stretch out with sweat or water. - Tri-Fix web splitter improves comfort and ease of strap adjustments, while an in-strap webbing system delivers ultralight construction and security. - Ultralight Mindset HairPort II micro-dial fit system with height adjustability for the perfect fit.

When we set out to improve the original S-Works Prevail, we knew that we had our work cut out for us. How could we improve on the industry benchmark for fit, ventilation, and comfort? By listening to our riders—that’s how. Through this, we realized that there were a few aspects of the original Prevail II that needed to be changed, with the biggest request being for a lower-sitting design. We thought to ourselves, "thinking big shouldn't result in bigger helmets," so with the Prevail, we set out to prove that big ideas can come in smaller packages. It all starts with our patented EPS construction that relies on multi-density foam that's paired with a robotically woven, Aramid-reinforced skeleton. This comes with a reduction in the overall size, creating a smaller profile that fits lower down on the head for a better fit and safety. It also has deep internal channels that are aligned from front-to-rear, so the air intake and exhaust are optimized for unparalleled cooling over the entire head. And in the Win Tunnel, we found these new designs amounted to six seconds saved over 40km when compared to a "standard" road helmet. Another standout feature of the S-Works Prevail II is the Gutter Action System that manages the flow of sweat, keeping it away from your eyes and dripping it off of the pads over your temple. Our new ANGi Crash Sensor gives you and your loved ones peace of mind like never before—when combined with our iOS or Android app, the sensor will detect a crash and send a text message to specified contacts in your phone. It also syncs with our app and STRAVA to provide GPS-based activity tracking. In the end, the S-Works Prevail II is the most complete lightweight race helmet we've ever made—perfect for hot, mountainous rides and flat, windy sections alike. - Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. - The patented aramid-reinforced skeleton provides internal EPS support. - Ultra-light Mindset HairPort II micro-dial fit system with height adjustability for the perfect fit. - Mega Mouthport optimizes cooling and sweat evaporation. - Aerodynamic design. - 4th Dimension Cooling System with deep internal channels, large vents, and aligned exhaust ports. - Thin, soft, and lightweight 4X DryLite webbing won't stretch out with sweat or water. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - Instrap webbing system for ultra-light construction and security. - Gutter Action brow pad design for increased comfort and sweat management. - Reflective decals for increased visibility to motorists in low-light conditions. - Patented clip-on visor included. - MIPS-equipped. - Integrated ANGi crash sensor.

A3 Helmet w/MIPS So comfortable you won't ever want to take it off. The A3 mountain bike helmet is a new standard in premium mountain bike helmets with luxurious comfort, patent-pending innovations in safety, ventilation that will you keep you cool on the longest climbs with comfort and coverage to protect on the sketchiest of descents. Highest possible score (5-STAR) from Virginia Tech helmet safety lab so you can feel confident in all conditions. Specifications - Co-molded EPP and EPS for low and high-speed Patent Pending impact energy management. - B-Series MIPS Rotational Brain Protection system creates an optimal 360 degree fit that can maximize the safety features built into the A3. - Advanced layering 3-piece shell - 3-Way Magnajust visor easily accommodates goggles whether they are stowed on the upswing or on your face. - TLD Sweat Glide System – EVA wicking foam behind the comfort liner along the front brow directs sweat away from the eyes and optics. Includes 2 spares. - 2-piece Ionic comfort liner for anti-microbial & sweat wicking properties that is also quick to dry - 16 vents optimally tuned with the channeling of the helmet to create the most intake and exhaust of any half shell helmet we've produced - Premium 3D Fidlock magnetic buckle system and composite smart shear screws are made to shear away during severe impact/direct hit to visor. - Includes helmet carrying bag, (2) spare sweat glide strips and a spare Ionic comfort liner and sticker kit - Certification - CPSC 1203, CE EN 1078, AS NZ 2063:2008.

A3 Helmet w/MIPS So comfortable you won't ever want to take it off. The A3 mountain bike helmet is a new standard in premium mountain bike helmets with luxurious comfort, patent-pending innovations in safety, ventilation that will you keep you cool on the longest climbs with comfort and coverage to protect on the sketchiest of descents. Highest possible score (5-STAR) from Virginia Tech helmet safety lab so you can feel confident in all conditions. Specifications - Co-molded EPP and EPS for low and high-speed Patent Pending impact energy management. - B-Series MIPS Rotational Brain Protection system creates an optimal 360 degree fit that can maximize the safety features built into the A3. - Advanced layering 3-piece shell - 3-Way Magnajust visor easily accommodates goggles whether they are stowed on the upswing or on your face. - TLD Sweat Glide System – EVA wicking foam behind the comfort liner along the front brow directs sweat away from the eyes and optics. Includes 2 spares. - 2-piece Ionic comfort liner for anti-microbial & sweat wicking properties that is also quick to dry - 16 vents optimally tuned with the channeling of the helmet to create the most intake and exhaust of any half shell helmet we've produced - Premium 3D Fidlock magnetic buckle system and composite smart shear screws are made to shear away during severe impact/direct hit to visor. - Includes helmet carrying bag, (2) spare sweat glide strips and a spare Ionic comfort liner and sticker kit - Certification - CPSC 1203, CE EN 1078, AS NZ 2063:2008.

XC COMPETITION-LEVEL SHOES INFUSED WITH S-PHYRE DNA. FEATURES - Lightweight SHIMANO ULTREAD XC rubber outsole delivers competition-grade grip that lasts. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Rider-tunable spikes allow riders to select and swap spikes to match riding styles and conditions. - Ultra-rigid, lightweight carbon fiber reinforced midsole. - Supple high-density synthetic leather with perforation and lightweight mesh/TPU combination bring superior fit and comfort. - Dual independent BOA® L6 dials allow quick, micro tension adjustments. - Adjustable powerzone lace guide securely holds forefoot. - Low stack height midsole helps stabilize foot, maximizes power transfer and efficiency.

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

Redefine Your Comfort Zone. To make a DH-certified full face with the ventilation and fit of a half shell, our development team took a fully integrated approach when creating the Gambit. Every component was engineered utilizing a comprehensive approach resulting in truly breakthrough performance where the Gambit delivers more than the sum of its parts. - Combines a lightweight carbon fiber shell, structurally specific polycarbonate backing, and five optimized pieces of targeted density foam (patent pending) for reduced weight, optimized fit, and increased ventilation. ASTM DH (1952) certified. - Tune a more precise, personalized fit thanks to Gambit's adjustable Integrated Fit System that accommodates variations in head shape and occipital base. - Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synched. - 4-position adjustable cheek pads provide fit refinement for any head shape. - Integrated, fixed visor with a breakaway feature provides a wide field of view while protecting against trail debris. - Average weight: 640 grams (medium). - Increased airflow and improved ventilation from the SBC Integrated Fit System does away with the excessive padding of a traditional full-face friction fit. - MIPS SL with our exclusive perforated backing integrates MIPS technology within the helmet padding and reduces moisture retention while increasing breathability. - Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet. 4D brow cooling provides a gap between the helmet and forehead, drawing airflow into internal air channels at every speed. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor.

With features from several of POC's award-winning helmets, and a unibody shell construction first introduced in our groundbreaking Octal road helmet, the Tectal Race SPIN provides protection and ventilation on a previously unseen scale for mountain bike riders. With the inclusion of SPIN (Shearing Pad INside), our patent-pending silicone pad technology system, the helmet further builds on our whole-helmet approach to design and construction in order to deliver superior levels of comfort, fit, and performance. Other safety features include an aramid bridge system for improved structural integrity and a reinforced EPS liner. The unibody shell construction supports the integrity of the helmet while ensuring the weight remains low. And with ventilation optimized and evaluated through wind tunnel testing, the Tectal Race SPIN delivers lightweight, reliable protection that will keep you cool-headed as you push your boundaries on the trail. - Lightweight - Highly ventilated using POC’s unique ventilation design - Simple and easy adjustment system - Goggle clip - Adjustable visor - Recco reflector

Technical Details: - Comfort fit - Bounder upper all seamless for comfort to prevent pressure points - New BOA Li2 micro-adjustment - Integrated X-Comfort Zone for a large range of feet width - Power Zone technology for better ankle support and stability to prevent adjustment - Carbon-injected/nylon outsole Ergo Grip 2 with improved traction on rocks - Removable studs for better traction in hard conditions - EVA insoles for better shock absorption - 12oz / 340g (size 42)

Technical Details: - Comfort fit - Bounder upper all seamless for comfort to prevent pressure points - New BOA Li2 micro-adjustment - Integrated X-Comfort Zone for a large range of feet width - Power Zone technology for better ankle support and stability to prevent adjustment - New Carbon-Injected/nylon outsole with constant ventilation to reduce fatigue and numbness - Arch support improved for better support - Ventilated insoles for constant airflow - Reflective highlights - 8.9oz / 252g (size 42)

Don't let rain or cold stop your ride. The Defroster Trail Mountain Bike shoes feature a seam-sealed bootie construction, Thinsulate insulation, and a neoprene collar to help keep your feet warm and dry even in the worst conditions. Meanwhile, a grippy SlipNot rubber sole provides incredible stability and traction in slippery conditions. They're just what you need to keep riding through the season, no matter what Old Man Winter has in store for you. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Thinsulate 400-gram insulation for warmth, with waterproof, seam-sealed internal bootie construction and reflective heat-loss barrier in the sole. - Sealed canopy and neoprene collar keep heat in and water out. - Nylon composite sole with wet traction SlipNot rubber tread: Stiffness Index 6.0. - Single Boa dial for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Fully reflective to increase your visibility to motorists in low-light conditions. - Roomy fit to accommodate winter weight socks—no need to size-up. - Durable sheet rubber heel and toe protection. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 533g (1/2 pair, Size 42)

Meet the all-new Propero 4 helmet—it brings the aero advantages of the S-Works Evade 3 together with the ventilation of S-Works Prevail 3, all with the comfort and confidence Specialized helmets are famous for, earning the highest 5-Star Virginia Tech® helmet rating. Every detail of the Propero 4 was created with our equation for speed in mind. Aerodynamics + Ventilation + Lightweight = Fast. AERODYNAMICS: With extensive testing in CFD and in our Win Tunnel, aerodynamics were at the forefront of the Propero 4 development. We took the aerodynamic leading edge from the S-Works Evade 3 and pulled it directly into the Propero 4—which helped it to be four watts, or 15 seconds over 40km, faster than our S-Works Prevail 3. VENTILATION: Drawing inspiration from our world-renowned S-Works Prevail 3, our goal was not merely to replicate but to elevate. Ventilation became a focal point in our quest for a well-balanced, aerodynamic, and ventilated helmet. We incorporated the rear-end design language of the S-Works Prevail 3 and introduced small 2mm offset micro-channels that create turbulence in the airflow throughout the helmet to help create a continuous, refreshing flow of air. ATTENTION TO DETAIL: Beyond just aerodynamics and ventilation, the Propero 4 represents meticulous attention to detail. We went the extra mile by incorporating cutting-edge technologies from our S-Works level helmets, like MIPS technology for confidence, and a fit system designed to deliver all-day comfort. The Propero 4 doesn't just meet expectations - Mips Evolve Solution is a low-friction layer that allows a sliding motion of 10 to 15mm in all directions. Studies indicate that this reduces some of the rotational forces transmitted to the brain during angled impacts. - Propero 4 earned the highest 5-Star Virginia Tech® Helmet Rating from internationally renowned Virginia Polytechnic Institute and State University. - FS3 Fit System & Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape, and helmet angle can be adjusted for compatibility with glasses. - Adjustable Tri-Fix web splitter combined with thin 10mm webbing for increased comfort. - Dedicated sunglass storage maintains a secure fit and keeps eyewear out of the way when needed. - Micro Channeling & large rear-end vents for increased ventilation. - S-Works Evade 3 front-end design language for enhanced Aerodynamics. - Precision, full-wrap polycarbonate shell for increased durability and premium finish

Technical Details: - Comfort-Fit - Bounder upper all seamless for comfort to prevent pressure points - New BOA Li2 micro-adjustment - Integrated X-Comfort Zone for a large range of feet widths - Power Zone technology for better ankle support and stability to prevent adjustment - New Carbon-Injected/nylon outsole with constant ventilation to reduce fatigue and numbness - Arch support improved for better support - Ventilated insoles for constant airflow - Reflective highlights - 7.8oz / 22g (size 38)